TY - JOUR ID - 165645 TI - Removal of Cr(III), Pb(II) and Cr-Pb Mixture by Blast Furnace Slag (BFS) in Solution JO - Analytical and Bioanalytical Chemistry Research JA - ABCR LA - en SN - AU - Toufik, Chouchane AU - Ouahida, Khireddine AU - Sana, Chibani AU - Aatmane, Boukari AD - Research Center in Industrial Technologies CRTI, P. O. Box: 64, Cheraga 16014 Algiers Algeria Y1 - 2023 PY - 2023 VL - 10 IS - 3 SP - 251 EP - 268 KW - Blast furnace slag KW - Cr(III) KW - Pb(II) KW - Kinetics KW - Adsorption Isotherm DO - 10.22036/abcr.2022.365182.1843 N2 - Blast furnace slag (BFS) was exploited as an adsorbent for the removal of Cr (III), Pb (II), and Cr-Pb. In discontinuous mode, the influence of the contact time, stirring speed, pH, mass of the adsorbent, initial concentration, and temperature were examined. The physico-chemical tests indicated that the BFS is formed from a mixture composed mainly of silicates, aluminates, lime, and magnesium oxide. Its specific surface is 325.6m2/g and the pHzpc value corresponds to 3.8. Experimental results have indicated that the equilibrium is obtained after 60, 50, and 80 minutes for Cr(III), Pb(II), and the Cr-Pb mixture, respectively. Under our experimental conditions (pH 4.8, Vag: 150rpm, T: 20°C, Øs: 200μm, and Ms: 1g), the adsorption capacities of Cr(III), Pb(II), Cr-Pb, Cr(III) in the mix, and Pb(II) in the mix were 43.16, 50.12, 39.91, 17.05, and 22.66mg/g, respectively. Moreover, BFS has more affinity for lead in the binary mixture. The adsorption isotherms revealed that the Langmuir model was the best fit for the metal ion adsorption processes examined (R2= 0.99). The kinetics indicated that the adsorption of the metal ions studied follows the pseudo-second order model and that their transfers from the solution to the adsorbent are controlled by external and intraparticle diffusion. The thermodynamic study has shown that all the processes applied are spontaneous, exothermic and less entropic. The desorption of the binary mixture revealed that saturated BFS can be efficiently exploited over four cycles, and it is more efficient in the presence of HCL at 0.1N. UR - https://www.analchemres.org/article_165645.html L1 - https://www.analchemres.org/article_165645_a1be6965f9ae2d3e5f61c53b9dfddbef.pdf ER -